加勒比超碰一区_成年网站亚洲第一av_久久久久国色ΑV免费观看_H漫画无码_日韩精品无码专区一二

客戶榮譽
kehury
技術文章
  • 唐山紅外熱像儀 FLIR A310 ex
  • 精密數字壓力計常見故障及對應的維護修理方法
  • 風力等級是如何劃分的
  • 渦街流量計的安裝注意事項
  • 維氏硬度計的適用場合
  • ET521A的萬用表功能簡述、性能比較與使用報告
  • 渦街流量計的發展應用與工作原理
  • 數字邏輯分析儀概述
  • 半導體熱電阻的特點
  • 工業熱電偶型式、基本參數及尺寸介紹
    		•
    唐山橄欖莊園進口食品有限公司
    唐山廣野食品集團有限公司銷售分公司
    唐山哈帥德清真食品有限公司
    唐山浩義機械設備有限公司
    唐山賀鑫機械設備有限公司
    唐山凱捷機電設備有限公司
    唐山凱生電機有限公司
    河北袋袋鼠食品有限公司
    河北鋼鐵股份有限公司唐山分公司冷板廠
    河北每日好食品有限公司
    河北千村綠食品有限公司
    河北省建安商貿有限公司
    河北唐山祥達物資有限公司
    河北文豐集團 唐山文豐山川輪轂有限公司
    遷安市萬贏食用菌種植專業合作社
    遷西縣金特食品有限公司
    遷西縣綠野養雞專業合作社
    唐山安豐機械設備有限公司
    唐山邦柯鐵路設備有限公司
    唐山寶柱食品有限公司
    唐山東汽發電設備有限公司
    唐山麗潔食品有限公司
    唐山銳興機械設備制造有限公司
    唐山森特自動化儀表有限公司
    唐山盛輝鋼鐵有限公司
    唐山市豐南區君曄機械制造有限公司
    唐山市豐南區俊怡營養食品有限公司
    唐山市豐南區維邦園林機械有限公司
    唐山市豐潤區宏鑫機械設備有限公司
    唐山市豐潤區啟鑫冷拉型鋼有限公司
    唐山市豐潤區潤馳貿易有限公司
    唐山市豐潤區田源純凈水有限公司
    唐山市豐潤區香香肉食品加工廠
    唐山市豐潤區智恒達金屬制品有限公司
    唐山市禾嘉食品有限公司
    唐山市華瑞鑫農面粉有限公司
    唐山市江南醇酒業有限公司
    唐山市金順機械設備有限公司
    唐山市聚善齋食品有限公司
    唐山市鈞陽機械有限公司
    唐山市開平區雷曼食品廠
    唐山市路北區德祥鑫消防器材有限公司
    唐山市日興食品有限公司
    唐山市味美佳食品有限公司
    唐山市祥潤食品有限公司
    唐山市雨之諾純凈水有限公司
    唐山帥鑫食品有限公司
    唐山順曌貿易有限公司
    唐山思諾食品有限公司
    唐山四通食品有限公司
    唐山萬通順和實業有限公司
    唐山新鑫鋼鐵有限公司
    唐山鑫勇進鋼鐵貿易有限公司
    鑫潤商貿商貿有限公司
    玉田縣恒碩機械設備制造有限公司
    玉田縣億鵬機械制造有限公司
    御品慶豐（唐山）食品有限公司
    當前位置：首頁 > 唐山儀器儀表 > 唐山環境檢測儀器 > 唐山紅外熱像儀
    紅外熱像儀
    型　號：FLIR A310 ex
    品　牌：美國FLIR
    技術指標：范圍：–20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    唐山紅外熱像儀-FLIR A310 ex-美國FLIR

    Fully compliant with ATEX regulations

    Use the power of thermal imaging in hazardous locations.

    Explosive atmospheres need to be protected from ignition sources by selecting equipment and protective systems which meet the requirements of the ATEX Product Regulations or similar regulations.

    FLIR A310 ex is an ATEX compliant solution, with a thermal imaging camera mounted in an enclosure, making it possible to monitor critical and other valuable assets also in explosive atmospheres. Process monitoring, quality control and fire detection in potentially explosive locations are typical applications for the A310 ex.



    FLIR A310 ex Thermal Camera Features

    A310ex schema
    1. Heater
    2. Sensors for temperature, air humidity, voltage & pressure
    3. Power supply: 24V DC
    4. 2 SFP ports for fiber optic, 100 Base-FX or copper ethernet
    5. ATEX compliant housing

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.

    Flame-Proof Enclosure “d”

    Prevents any explosion transmission from the inside of the enclosure to the outside.

    For use in harsh environments: IP67

    The FLIR A310 ex is IP67 rated. Ideal to install in dusty environments.

    Integrated controller

    The integrated controller features several digital I/O channels and sensors for temperature, humidity and pressure. Among other functions, the I/O channels enable the user to switch on/off the camera and the heater via remote control. The access is accomplished through an integrated web interface or Modbus TCP/IP.

    Flexible integration

    The integrated controller is equipped with 2 fiber optic and 2 Ethernet parts. This enables a flexible network integration in star or ring topologies.

    Heater

    FLIR A310 ex comes with a heater which effectively prevents fogging and freezing of the protection window.

    Plug and play installation

    FLIR A310 ex is lightweight and the entire system is delivered ready for use.

    Verification Certificate ZELM 12 ATEX 0485 X

    The FLIR A310 ex is ATEX certified. It can be installed in classification zones 1, 2, 21, 22.

    The certification comprises the whole system which includes the enclosure as well as all components inside, such as the thermal imaging camera, heater and integrated controller.

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.



    FLIR A310 ex Technical Specifications

    General Data
    Ambient temperature range for operation –20°C to +40°C (-4°F to 104°F)
    Protection class IP67
    Weight 6.7 kg (without camera and lens)
    Empty volume 5.06 l
    External dimensions (without sun shield) D = 170 mm, L = 408 mm
    Housing material / Surface Nickel-plated aluminium / Powder coated
    Protection window Germanium, double-sided AR Coated, externally with additional hard-carbon layer
    Maximum power of the additional heater 16 W
    Operating voltage 24 V DC
    Maximum electric connection power 60 W
    Power cable / Power cable configuration Helukabel 37264 / Pigtail
    Length of power cable 4 m (13 ft.)
    Integrated controller 4-port switch with 2 × fiber-optic LC 100Base-FX or 2 × RJ45(10/100) up-links, ring-topology support for reduced cabling effort, 2 × internal temperature sensors, air humidity and pressure sensor, digital output module controllable via Modbus TCP/IP or web interface to enable turning the heater on/off
    Ethernet medium Multi-mode breakout fiber AT-V(ZN)Y(ZN)Y 4G50/125 OM2
    Length of Ethernet cable 4 m (13 ft.)
    Ethernet, configuration Pigtail with FC-connector
    Explosion protection-specific data
    For use in EX zone 1, 2, 21, and 22
    Ignition protection category Flame-proof enclosure “d”
    Maximum surface temperature (according to temperature class T6) Maximum 85°C
    ATEX certification (version -AXC) EX-Protection Gas: II 2G Ex d IIC T6 Gb, EX-Protection Dust: II 2D Ex tb IIC T85° Db
    Verification certificate ZELM 12 ATEX 0485 X
    Imaging and optical data
    IR resolution 320 × 240 pixels
    Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK
    Field of view (FOV) / Focal length 25° × 18.8° with 18 mm (0.7 in.) lens or 45° × 33.8° with 9.66 mm (0.38 in.) lens
    Minimum focus distance 0.4 m (1.31 ft.)
    Spatial resolution (IFOV) 1.36 mrad with 25° lens or 2.59 mrad with 45° lens
    Lens identification Automatic
    F-number 1.3
    Image frequency 30 Hz
    Focus Automatic or manual (built in motor)
    Zoom 1–8× continuous, digital, interpolating zooming on images
    Detector data
    Detector type Focal Plane Array (FPA), uncooled microbolometer
    Spectral range 7.5–13 μm
    Detector pitch 25 μm
    Detector time constant Typical 12 ms
    Measurement
    Object temperature range –20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    Accuracy ±2°C (±3.6°F) or ±2% of reading
    Measurement analysis
    Spotmeter 10
    Area 10 boxes with max./min./average/position
    Isotherm 1 with above/below/interval
    Measurement option Measurement Mask Filter Schedule response: File sending (ftp), email (SMTP)
    Difference temperature Delta temperature between measurement functions or reference temperature
    Reference temperature Manually set or captured from any measurement function
    Atmospheric transmission correction Automatic, based on inputs for distance, atmospheric temperature and relative humidity
    Optics transmission correction Automatic, based on signals from internal sensors
    Emissivity correction Variable from 0.01 to 1.0
    Reflected apparent temperature correction Automatic, based on input of reflected temperature
    External optics/windows correction Automatic, based on input of optics/window transmission and temperature
    Measurement corrections Global and individual object parameters
    Alarm
    Alarm functions 6 automatic alarms on any selected measurement function, Digital In, Camera temperature, timer
    Alarm output Digital Out, log, store image, file sending (ftp), email (SMTP), notification
    Set-up
    Color palettes Color palettes (BW, BW inv, Iron, Rain)
    Set-up commands Date/time, Temperature°C/°F
    Storage of images
    Storage media Built-in memory for image storage
    File formats Standard JPEG, 16-bit measurement data included
    Ethernet
    Ethernet Control, result and image
    Ethernet, type / standard 100 Mbps / IEEE 802.3
    Ethernet, configuration Pigtail with FC-connector (fiber)
    Ethernet, communication TCP/IP socket-based FLIR proprietary
    Ethernet, video streaming MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5
    Ethernet, image streaming 16-bit 320 × 240 pixels @ 7-8 Hz - Radiometric
    Ethernet, protocols Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
    Shipping information
    Infrared camera with lens, in explosion-proof housing, cardboard box, Printed documentation, User documentation CD-ROM, Utility CD-ROM


    ，礦用本質安全型紅外熱像儀，
    同類產品
    地址：青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話：0532-86069117　83812497　83821263
    傳真：0532-88786387 網址：www.cafeji.cn
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號