加勒比超碰一区_成年网站亚洲第一av_久久久久国色ΑV免费观看_H漫画无码_日韩精品无码专区一二

客戶榮譽
kehury
技術文章
  • 壽光紅外熱像儀 FLIR A310 ex
  • 熱處理工件硬度的檢測方法
  • 數顯壓力表在現場使用要注意的幾點
  • Phasor超聲波探傷儀
  • FLUKE儀表在電力行業應用成功案例
  • F971應用——評估相對濕度：關鍵因素及其測量
  • 基于紅外線的轉速測量儀研制
  • 維氏硬度計選型注意事項
  • 布氏硬度（HB）原理
  • 調節閥在高、低溫下閥工作不正常的5種解決方法
    		•
    壽光市天帝食品加工廠
    壽光市通達機械設備維修有限公司
    壽光市通用熱處理廠
    壽光市萬通機械有限公司
    壽光市偉業機械有限公司
    壽光市效宇冶金機械有限公司
    壽光市鑫昊鋼材有限公司
    壽光市鑫利船舶機械配件有限公司
    壽光市鑫潤達機械廠
    壽光市鑫宇機械加工廠
    壽光市億康農業機械有限公司
    壽光市永豐農業機械有限公司
    壽光市永金機械廠
    壽光市永利精密機械有限公司
    壽光市煜翔汽車電器有限公司
    壽光市震泰電子有限公司
    壽光市志騰工程機械租賃有限公司
    山東佰盛科技有限公司
    山東東寶鋼管有限公司
    山東福美光電科技有限公司
    山東海化集團股份公司純堿廠
    山東�；鹪粗圃旆止�
    山東匯源建材集團內貿業務部
    山東匯源建材有限公司
    山東省壽光市六豐實業有限公司
    山東省壽光市清國塑料制品有限公司
    山東省壽光市泰豐底盤制造公司
    山東壽光健元春塑料制品有限公司
    山東壽光巨能控股集團公司
    山東壽光科迪電子有限公司分公司
    山東壽光圣海保健品有限公司
    山東壽光市晨鑫窗飾制品廠
    山東壽光市華銘軟件科技有限公司
    山東濰坊瑞豐有限公司
    山東濰坊圣寶散熱器廠
    山東濰坊市華東橡膠有限公司
    山東濰坊順遠航運有限公司
    山東銀寶輪胎集團有限公司
    山東銀寶輪胎集團有限公司外貿部
    山東永力起重機械股份有限公司壽光分公司
    山東宗鑫塑料制品有限公司
    壽光廣通齒輪有限公司
    壽光宏宇電子材料廠
    壽光華恒木制包裝有限公司
    壽光華宇釘業有限公司
    壽光匯鑫五金經貿有限公司
    壽光錦昌機械有限責任公司
    壽光三元農業機械有限公司
    壽光山水木業有限公司
    壽光市創新機械設備有限公司
    壽光市大成五金機電有限公司
    壽光市德圣機械有限公司
    壽光市鼎立機械有限公司
    壽光市飛翔貿易有限公司
    壽光市富士聚酯薄膜有限公司
    壽光市富士木業
    壽光市恒潤精密機械有限公司
    壽光市恒泰機械制造有限公司
    壽光市恒越機械有限公司
    壽光市宏達稀土材料有限公司
    壽光市宏興機械有限公司
    壽光市華夏防水材料公司
    壽光市金福祥鋼材有限公司
    壽光市科洋光電科貿有限公司
    壽光市坤隆石油機械有限公司業務
    壽光市隆達菜果有限公司
    壽光市隆浩窗飾有限公司
    壽光市隆愷機械制造有限公司
    壽光市明華輪胎總匯
    壽光市鵬朔機械鑄造有限公司
    壽光市其昌機械配件有限公司
    壽光市瑞豐特智能電器節能設備廠
    壽光市晟發防水機械制造有限公司
    壽光市盛達電子有限公司
    壽光市雙豐建筑機械租賃有限公司
    壽光市雙正文科電子科技發展有限公司
    壽光市騰達工貿有限公司
    壽光市騰達機械制造有限公司
    壽光市騰豐醫療器械有限公司
    壽光新晨工貿有限公司
    壽光信德機械有限責任公司
    天成科技開發有限公司
    濰坊東盛竹業有限公司
    濰坊華源橡膠廠
    濰坊金達防水有限公司
    濰坊市立多塑膠有限公司
    濰坊天康機電設備有限公司
    濰坊天信散散熱器有限公司
    濰坊中連電子有限公司
    中凱清潔能源有限公司
    當前位置：首頁 > 壽光儀器儀表 > 壽光環境檢測儀器 > 壽光紅外熱像儀
    紅外熱像儀
    型　號：FLIR A310 ex
    品　牌：美國FLIR
    技術指標：范圍：–20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    壽光紅外熱像儀-FLIR A310 ex-美國FLIR

    Fully compliant with ATEX regulations

    Use the power of thermal imaging in hazardous locations.

    Explosive atmospheres need to be protected from ignition sources by selecting equipment and protective systems which meet the requirements of the ATEX Product Regulations or similar regulations.

    FLIR A310 ex is an ATEX compliant solution, with a thermal imaging camera mounted in an enclosure, making it possible to monitor critical and other valuable assets also in explosive atmospheres. Process monitoring, quality control and fire detection in potentially explosive locations are typical applications for the A310 ex.



    FLIR A310 ex Thermal Camera Features

    A310ex schema
    1. Heater
    2. Sensors for temperature, air humidity, voltage & pressure
    3. Power supply: 24V DC
    4. 2 SFP ports for fiber optic, 100 Base-FX or copper ethernet
    5. ATEX compliant housing

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.

    Flame-Proof Enclosure “d”

    Prevents any explosion transmission from the inside of the enclosure to the outside.

    For use in harsh environments: IP67

    The FLIR A310 ex is IP67 rated. Ideal to install in dusty environments.

    Integrated controller

    The integrated controller features several digital I/O channels and sensors for temperature, humidity and pressure. Among other functions, the I/O channels enable the user to switch on/off the camera and the heater via remote control. The access is accomplished through an integrated web interface or Modbus TCP/IP.

    Flexible integration

    The integrated controller is equipped with 2 fiber optic and 2 Ethernet parts. This enables a flexible network integration in star or ring topologies.

    Heater

    FLIR A310 ex comes with a heater which effectively prevents fogging and freezing of the protection window.

    Plug and play installation

    FLIR A310 ex is lightweight and the entire system is delivered ready for use.

    Verification Certificate ZELM 12 ATEX 0485 X

    The FLIR A310 ex is ATEX certified. It can be installed in classification zones 1, 2, 21, 22.

    The certification comprises the whole system which includes the enclosure as well as all components inside, such as the thermal imaging camera, heater and integrated controller.

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.



    FLIR A310 ex Technical Specifications

    General Data
    Ambient temperature range for operation –20°C to +40°C (-4°F to 104°F)
    Protection class IP67
    Weight 6.7 kg (without camera and lens)
    Empty volume 5.06 l
    External dimensions (without sun shield) D = 170 mm, L = 408 mm
    Housing material / Surface Nickel-plated aluminium / Powder coated
    Protection window Germanium, double-sided AR Coated, externally with additional hard-carbon layer
    Maximum power of the additional heater 16 W
    Operating voltage 24 V DC
    Maximum electric connection power 60 W
    Power cable / Power cable configuration Helukabel 37264 / Pigtail
    Length of power cable 4 m (13 ft.)
    Integrated controller 4-port switch with 2 × fiber-optic LC 100Base-FX or 2 × RJ45(10/100) up-links, ring-topology support for reduced cabling effort, 2 × internal temperature sensors, air humidity and pressure sensor, digital output module controllable via Modbus TCP/IP or web interface to enable turning the heater on/off
    Ethernet medium Multi-mode breakout fiber AT-V(ZN)Y(ZN)Y 4G50/125 OM2
    Length of Ethernet cable 4 m (13 ft.)
    Ethernet, configuration Pigtail with FC-connector
    Explosion protection-specific data
    For use in EX zone 1, 2, 21, and 22
    Ignition protection category Flame-proof enclosure “d”
    Maximum surface temperature (according to temperature class T6) Maximum 85°C
    ATEX certification (version -AXC) EX-Protection Gas: II 2G Ex d IIC T6 Gb, EX-Protection Dust: II 2D Ex tb IIC T85° Db
    Verification certificate ZELM 12 ATEX 0485 X
    Imaging and optical data
    IR resolution 320 × 240 pixels
    Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK
    Field of view (FOV) / Focal length 25° × 18.8° with 18 mm (0.7 in.) lens or 45° × 33.8° with 9.66 mm (0.38 in.) lens
    Minimum focus distance 0.4 m (1.31 ft.)
    Spatial resolution (IFOV) 1.36 mrad with 25° lens or 2.59 mrad with 45° lens
    Lens identification Automatic
    F-number 1.3
    Image frequency 30 Hz
    Focus Automatic or manual (built in motor)
    Zoom 1–8× continuous, digital, interpolating zooming on images
    Detector data
    Detector type Focal Plane Array (FPA), uncooled microbolometer
    Spectral range 7.5–13 μm
    Detector pitch 25 μm
    Detector time constant Typical 12 ms
    Measurement
    Object temperature range –20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    Accuracy ±2°C (±3.6°F) or ±2% of reading
    Measurement analysis
    Spotmeter 10
    Area 10 boxes with max./min./average/position
    Isotherm 1 with above/below/interval
    Measurement option Measurement Mask Filter Schedule response: File sending (ftp), email (SMTP)
    Difference temperature Delta temperature between measurement functions or reference temperature
    Reference temperature Manually set or captured from any measurement function
    Atmospheric transmission correction Automatic, based on inputs for distance, atmospheric temperature and relative humidity
    Optics transmission correction Automatic, based on signals from internal sensors
    Emissivity correction Variable from 0.01 to 1.0
    Reflected apparent temperature correction Automatic, based on input of reflected temperature
    External optics/windows correction Automatic, based on input of optics/window transmission and temperature
    Measurement corrections Global and individual object parameters
    Alarm
    Alarm functions 6 automatic alarms on any selected measurement function, Digital In, Camera temperature, timer
    Alarm output Digital Out, log, store image, file sending (ftp), email (SMTP), notification
    Set-up
    Color palettes Color palettes (BW, BW inv, Iron, Rain)
    Set-up commands Date/time, Temperature°C/°F
    Storage of images
    Storage media Built-in memory for image storage
    File formats Standard JPEG, 16-bit measurement data included
    Ethernet
    Ethernet Control, result and image
    Ethernet, type / standard 100 Mbps / IEEE 802.3
    Ethernet, configuration Pigtail with FC-connector (fiber)
    Ethernet, communication TCP/IP socket-based FLIR proprietary
    Ethernet, video streaming MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5
    Ethernet, image streaming 16-bit 320 × 240 pixels @ 7-8 Hz - Radiometric
    Ethernet, protocols Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
    Shipping information
    Infrared camera with lens, in explosion-proof housing, cardboard box, Printed documentation, User documentation CD-ROM, Utility CD-ROM


    ，意大利紅外熱像儀，
    同類產品
    地址：青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話：0532-86069117　83812497　83821263
    傳真：0532-88786387 網址：www.cafeji.cn
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號